DFM 4.0 Doppler Flow Meter

DFM 4.0 Doppler Flow Meter

Measure flow from outside a pipe. The Greyline DFM 4.0 is ideal for "difficult liquids" that would damage regular flow meters - wastewater, slurries, sludge, chemicals, viscous liquids and abrasives. There is no obstruction to flow and no pressure drop. The standard, strap-on ultrasonic sensor fits any pipe 1/2" (12.5 mm) Inside Diameter or larger. The electronics/display enclosure can be mounted nearby.

Use the isolated 4-20mA to transmit flow to remote displays, recorders or controllers. The 3 programmable relays can be used for flow control, pump protection or flow proportionate pulse. Calibration is easy with the built-in 3-key calibrator. Display and totalize flow in your choice of engineering units (gallons, liters etc.)

Sensor cable can be extended up to 500 ft. (152 m) with no loss of signal. The DFM 4.0 can be equipped with intrinsic safety barriers for sensor installation in hazardous rated locations. Other options include high temperature sensors and a built-in 50,000 point Data Logger.

The DFM 4.0 includes a new digital signal processor to filter background noise and interference and to measure flow rates accurately in liquids containing gas bubbles or solids particles.

Portable Model for Flow Troubleshooting and Spot Checks... Consider the new handheld PDFM 5.0 Portable Doppler Flow Meter for flow troubleshooting and spot checks. It also works from outside the pipe with a clamp-on ultrasonic sensor, and includes a large digital display, totalizer and 4-20mA output.

Copyright © 2007-2010 [Greyline Instruments Inc.] All rights reserved.
Information in this document is subject to change without notice.